📏 Endometrial Thickness Checker

Enter your scan measurements below. Endometrial thickness is measured as the total double-layer thickness (bilayer) on transvaginal ultrasound, typically on the trigger day (IVF) or at ovulation (natural cycle).

⚕️ Medical Note: This tool provides educational information only. Your IVF specialist will make the final transfer decision based on the full clinical picture including your lining pattern, progesterone levels, and treatment history.

Endometrial Thickness Reference Chart

What each thickness range means for IVF and natural conception

Very Thin
Below 6mm
Cancel / Freeze
Thin
6–7mm
Borderline
Acceptable
7–8mm
Proceed carefully
Optimal
8–12mm
Best outcomes
Thick
Above 14mm
Assess further

What Makes an Ideal Endometrium for Transfer?

The ideal endometrium for embryo implantation has three key characteristics: (1) Thickness of 8–12mm; (2) Trilaminar (three-layer) pattern on ultrasound — indicating appropriate oestrogen priming and receptivity; (3) Good uterine blood flow on Doppler. A thin or homogeneous endometrium significantly reduces implantation success even with good quality embryos.

Thin Endometrium in IVF: What Next?

If your lining is below 7mm, your IVF specialist may recommend: high-dose oestrogen (Progynova, Estradiol patches), low-dose Aspirin (75mg), Sildenafil vaginal suppositories, Vitamin E, PRP endometrial therapy (available at Mother Hospitals), or a freeze-all strategy for a better FET cycle.

Thick Endometrium (Above 14mm)

A very thick endometrium (above 14mm) may indicate endometrial polyps, hyperplasia, or adenomyosis. Typically warrants a hysteroscopy to rule out intrauterine pathology before transfer. Thicker is not necessarily better — quality and pattern matter as much as thickness.

ఎండోమెట్రియల్ థిక్‌నెస్ రెఫరెన్స్ చార్ట్

ప్రతి థిక్‌నెస్ రేంజ్ IVF మరియు నేచురల్ కన్సెప్షన్‌కు ఏమి సూచిస్తుంది

చాలా తక్కువ
6mm కంటే తక్కువ
క్యాన్సెల్/ఫ్రీజ్
తక్కువ
6–7mm
బోర్డర్‌లైన్
అంగీకారయోగ్యం
7–8mm
జాగ్రత్తగా ముందుకు
ఆప్టిమల్
8–12mm
అత్యుత్తమ ఫలితాలు
మందంగా
14mm పైన
ఫర్థర్ అసెస్

ట్రాన్స్‌ఫర్‌కు ఐడియల్ ఎండోమెట్రియం ఎలా ఉండాలి?

ఎంబ్రియో ఇంప్లాంటేషన్‌కు ఐడియల్ ఎండోమెట్రియం మూడు కీ కారెక్టరిస్టిక్స్ ఉండాలి: (1) 8–12mm థిక్‌నెస్; (2) అల్ట్రాసౌండ్‌లో ట్రైలామినార్ (మూడు-లేయర్) పాటర్న్ — సరైన ఈస్ట్రోజెన్ ప్రైమింగ్ మరియు రిసెప్టివిటీ చూపిస్తుంది; (3) డాప్లర్‌లో మంచి యూటరైన్ బ్లడ్ ఫ్లో. తక్కువ లేదా హోమోజెనియస్ ఎండోమెట్రియం మంచి ఎంబ్రియోస్ ఉన్నా కూడా ఇంప్లాంటేషన్ సక్సెస్ గణనీయంగా తగ్గిస్తుంది.

IVF లో థిన్ ఎండోమెట్రియం: తర్వాత ఏం చేయాలి?

లైనింగ్ 7mm కంటే తక్కువగా ఉంటే, స్పెషలిస్ట్ రెకమెండ్ చేయవచ్చు: హై-డోస్ ఈస్ట్రోజెన్ (Progynova, Estradiol పాచెస్), లో-డోస్ ఆస్పిరిన్ (75mg), సిల్డెనాఫిల్ వెజైనల్ సప్పోజిటరీస్, విటమిన్ E, PRP ఎండోమెట్రియల్ థెరపీ (Mother Hospitals లో అందుబాటులో ఉంది), లేదా బెటర్ FET సైకిల్ కోసం ఫ్రీజ్-ఆల్ స్ట్రాటెజీ.

థిక్ ఎండోమెట్రియం (14mm పైన)

చాలా థిక్ ఎండోమెట్రియం (14mm పైన) ఎండోమెట్రియల్ పాలిప్స్, హైపర్‌ప్లాసియా, లేదా అడెనోమైయోసిస్ సూచించవచ్చు. ట్రాన్స్‌ఫర్ ముందు ఇంట్రాయూటరైన్ పాథాలజీ రూల్ అవుట్ చేయడానికి హిస్టెరోస్కోపీ సాధారణంగా అవసరం. మందంగా ఉంటే బెటర్ కాదు — క్వాలిటీ మరియు పాటర్న్ కూడా థిక్‌నెస్ అంత ఇంపార్టెంట్.

Frequently Asked Questions

What is the minimum endometrial thickness for embryo transfer?

Most IVF specialists require a minimum of 7mm for embryo transfer, with 8–12mm considered optimal. Below 7mm significantly reduces implantation rates. Some clinics proceed at 6mm with caution, but below 6mm, transfer is usually cancelled and embryos frozen for a better cycle.

What is a trilaminar endometrial pattern?

A trilaminar pattern on ultrasound shows three distinct dark and bright lines. This is seen in the mid-follicular phase (Days 9–14) and indicates well-developed, oestrogen-primed lining ready for implantation. A homogeneous (featureless, bright) pattern in the pre-transfer period is less favourable and associated with lower success rates.

What causes a thin endometrium?

Common causes include low oestrogen levels, Asherman's syndrome (intrauterine adhesions from previous D&C or infection), chronic endometritis, previous uterine surgery, fibroids, or poor uterine blood flow. Treatment includes high-dose oestrogen, Sildenafil (vaginal), aspirin, vitamin E, and PRP therapy.

Can I get pregnant with a thin endometrium?

Pregnancy is possible but implantation rates are significantly lower. If your lining is consistently below 7mm on transfer day, your doctor may recommend cancelling the fresh transfer, freezing embryos, and preparing the lining more aggressively for a FET cycle. Dr. E. Prashanthi Reddy offers PRP endometrial therapy for recurrent thin lining cases.

When is endometrial thickness measured in IVF?

In a fresh IVF cycle: at baseline (Day 2–3), mid-stimulation (Day 7–9), and on trigger day. In FET cycles: around Day 10–12 of oestrogen preparation before switching to progesterone. The ideal thickness is confirmed before starting progesterone.

What endometrial thickness is needed for natural conception?

For natural conception, 8–14mm at ovulation (around Day 14 in a 28-day cycle) is optimal. Below 7mm at ovulation may reduce natural conception chances but is not an absolute barrier. See a fertility specialist if your lining is consistently thin on monitoring scans.

తరచుగా అడిగే ప్రశ్నలు

ఎంబ్రియో ట్రాన్స్‌ఫర్‌కు కనీస ఎండోమెట్రియల్ థిక్‌నెస్ ఎంత?

చాలా IVF స్పెషలిస్ట్లు కనీసం 7mm కావాలని అంటారు, 8–12mm ఆప్టిమల్. 7mm కంటే తక్కువ ఉంటే ఇంప్లాంటేషన్ రేట్స్ గణనీయంగా తగ్గుతాయి. కొన్ని క్లినిక్స్ 6mm వద్ద జాగ్రత్తగా ముందుకు వెళ్తాయి, కానీ 6mm కంటే తక్కువ అయితే సాధారణంగా ట్రాన్స్‌ఫర్ క్యాన్సెల్ అవుతుంది.

ట్రైలామినార్ ఎండోమెట్రియల్ పాటర్న్ అంటే ఏమిటి?

అల్ట్రాసౌండ్‌లో ట్రైలామినార్ పాటర్న్ మూడు వేర్వేరు డార్క్ మరియు బ్రైట్ లైన్లు చూపిస్తుంది. ఇది మిడ్-ఫాలిక్యులర్ ఫేజ్‌లో (Days 9–14) కనిపిస్తుంది మరియు వెల్-డెవలప్డ్, ఈస్ట్రోజెన్-ప్రైమ్డ్ లైనింగ్ సూచిస్తుంది. హోమోజెనియస్ (ఫీచర్‌లెస్, బ్రైట్) పాటర్న్ తక్కువ ఫేవరబుల్.

థిన్ ఎండోమెట్రియం కారణాలు ఏమిటి?

కామన్ కారణాలు: లో ఈస్ట్రోజెన్, అష్ర్మాన్ సిండ్రోమ్ (ఇంట్రాయూటరైన్ అడ్హెజన్స్), క్రానిక్ ఎండోమెట్రైటిస్, మునుపటి యూటరైన్ సర్జరీ, ఫైబ్రాయిడ్స్, లేదా పూర్ యూటరైన్ బ్లడ్ ఫ్లో. ట్రీట్‌మెంట్: హై-డోస్ ఈస్ట్రోజెన్, సిల్డెనాఫిల్ (వెజైనల్), ఆస్పిరిన్, విటమిన్ E, మరియు PRP థెరపీ.

థిన్ ఎండోమెట్రియంతో ప్రెగ్నెంట్ అవ్వవచ్చా?

ప్రెగ్నెన్సీ సాధ్యమే కానీ ఇంప్లాంటేషన్ రేట్స్ గణనీయంగా తగ్గుతాయి. ట్రాన్స్‌ఫర్ డేలో లైనింగ్ నిరంతరం 7mm కంటే తక్కువగా ఉంటే, ఫ్రెష్ ట్రాన్స్‌ఫర్ క్యాన్సెల్ చేసి ఎంబ్రియోస్ ఫ్రీజ్ చేయాలని, బెటర్ FET సైకిల్‌కు అగ్రెసివ్‌గా లైనింగ్ ప్రిపేర్ చేయాలని రెకమెండ్ చేయవచ్చు. Dr. E. Prashanthi Reddy రికరెంట్ థిన్ లైనింగ్ కేసులకు PRP ఎండోమెట్రియల్ థెరపీ అందిస్తారు.

IVF లో ఎండోమెట్రియల్ థిక్‌నెస్ ఎప్పుడు మెజర్ చేస్తారు?

ఫ్రెష్ IVF సైకిల్‌లో: బేస్‌లైన్ (Day 2–3), మిడ్-స్టిమ్యులేషన్ (Day 7–9), మరియు ట్రిగర్ డేలో. FET సైకిల్స్‌లో: ప్రొజెస్టెరోన్ స్విచ్ ముందు ఈస్ట్రోజెన్ ప్రిపరేషన్ Day 10–12 లో. ప్రొజెస్టెరోన్ స్టార్ట్ ముందు ఐడియల్ థిక్‌నెస్ కన్ఫర్మ్ అవుతుంది.

నేచురల్ కన్సెప్షన్‌కు ఎంత ఎండోమెట్రియల్ థిక్‌నెస్ కావాలి?

నేచురల్ కన్సెప్షన్‌కు ఒవ్యులేషన్ వేళ (28-రోజుల సైకిల్‌లో Day 14 లో) 8–14mm ఆప్టిమల్. 7mm కంటే తక్కువ నేచురల్ కన్సెప్షన్ చాన్సెస్ తగ్గించవచ్చు కానీ అబ్సొల్యూట్ బ్యారియర్ కాదు. మానిటరింగ్ స్కాన్స్‌లో నిరంతరం లైనింగ్ తక్కువగా ఉంటే ఫెర్టిలిటీ స్పెషలిస్ట్ని కన్సల్ట్ చేయండి.